|
 |
| Availability: |
in stock |
| Prod. Code: |
|
|
HKDC- F series 500W DC-DC Converter
HKDC- F Series 500W DC-DC converter is designed for low-voltage power supply of electric vehicles. The product not only has high efficiency, small size, high stability, long life and other advantages, but also has a high degree of protection. Its highly reliable, full-featured protection and other features is ideal for low-voltage power supply of the electric vehicle. The power module has built-in thermal sensing device having thermal shutdown and automatic recovery. Fully sealed encapsulation process, up to IP67 protection class, you can be sure that it will work in any complex environment with high reliability.
Main features: Full casting process, natural cooling conditions, can work reliably under conditions -40 - + 60 ℃. Built-in temperature sensor (internal 90° C) off output. Degree of protection IP67.
o Specifications (also available FDC-LV-13V8-AL, 30~100VDC input)
|
|
FDC-MV-13V8-AL(HV positive enable)
|
|
I
N
P
U
T
|
Input voltage range
|
DC64~133V
|
|
Frequency
|
Direct-current
|
|
Effectiveness
|
≥90% 500W
|
|
Input reverse polarity protection
|
No
|
|
Input Overvoltage Protection
|
133V
|
|
Input Undervoltage Protection
|
64V
|
|
Input fuse
|
When you use need to input by adding a fuse
|
|
Applicable Battery System
|
80~96V Battery System
|
|
Static Power
|
load current is less than0.3Acontinued10Minutes into power-saving mode，
Standby Power ≤0.5W
|
|
O
U
T
P
U
T
|
Output Method
|
Constant/ Constant
|
|
Output Current
|
maximum50A
|
|
Constant Current Accuracy
|
±4%
|
|
Constant Output Voltage
|
13.8V
|
|
Constant Accuracy
|
±1%
|
|
P-p ripple voltage
|
200mV
|
|
|
Overvoltage Protection
|
Output＞16.0V Overvoltage Relay，Abnormalities disappear from the new starting power to resume normal work
|
|
O
T
H
E
R
|
ISOLATION
|
Input to ground:500VDC≤10mA
Input to output: 500VDC≤10mA
Output to ground:500VDC≤10mA
500VDCInsulation resistance≥10M Europe
|
|
Protection Class
|
IP67
|
|
Operating Temperature
|
－40℃~ ＋60℃
|
|
Storage Temperature
|
－55℃~ ＋85℃
|
|
Overtemperature Protection
|
Module temperature reaches90Degree stop working，After cooling, the power supply automatically resume normal operation
|
o Dimensions
Please contact us using the Contact Us page
Electric Conversions, 515 N. 10th St., Sacramento, CA 95811
