New UHF IP67 Sealed CAN Bus Chargers > 1.8KW UHF CAN bus Charger
1.8KW UHF CAN bus Charger

Availability: in stock

HK-H series 1.8KW CAN bus charger

The 1.8KW charger is available in the following models.  The first number is the maximum voltage.  The second number is the maximum current.

HK-H-H66-25

HK-H-H99-25

HK-H-H132-16

 1. Outline                                    

The HK-H series 1.8KW charger is designed for electric vehicle battery and battery management system interface. The product not only has high efficiency, small volume, high stability, long life, etc., higher degree of protection, high reliability, and other functional features, it is the ideal power source for electric vehicle charging. Charger has built-in thermal sensing device providing thermal overload protection and automatic recovery. Fully sealed encapsulation process, up to IP67 protection class, you can be sure that it will work in any complex environment with high reliability.

2. Product Models

3. Features

1、Up to 95% efficiency

2、Strong protection

3、Extended temperature operating temperature range

4、100% full load burn-in test

5、The high degree of protection up to IP67

6、Automotive-grade seismic rating

7、While charging the battery intelligent temperature compensation, maximizing battery life

8、The input voltage range AC85-AC280, for worldwide voltage range。

4. Reliability                  

Index

Data Definition

Explanation

MTBF

150,000 H

Reliability launched by the device failure rate

       

5. Product work environment                

No.

Items

Technical Specifications

1

Operating temperature

-40℃-+60℃

2

Storage temperature

-40℃-+90℃

3

Relative humidity

5% -95%

4

Cooling

Air-cooled

5

Altitude

3000m

6. Electrical Characteristics

6.1  Input characteristics                      

Current and output voltage of each power input

Input voltage

Input current IN

Maximum output power

110V

IN≤7A

800W

220V

IN≤9A

1800W

 6.2  Output characteristics                         

test

Ratings

tolerance scope

Output voltage accuracy

1%

/

Output current accuracy

3%

/

The output voltage ripple factor

1.5%

 

Maximum DC output power

1600W

/

Maximum efficiency

≥95%

/

Power Factor

0.99

/

6.3  Protection Features

a) Output overvoltage protection;

         b) Output overcurrent protection;

         c) Output short circuit protection;

d) Input undervoltage protection

         e) Charger over-temperature protection;

          f) Battery over-temperature protection。

 3. Features

1、Up to 95% efficiency

2、Strong protection

3、Extended temperature operating temperature range

4、100% full load burn-in test

5、The high degree of protection up to IP67

6、Automotive-grade seismic rating

7、While charging the battery intelligent temperature compensation, maximizing battery life

8、The input voltage range is AC85-AC280, for worldwide voltage range

6.4 Standby power charger standby power consumption of less than 5W

6.5 Starting current charger starting current is less than5A

6.6 Input Frequency (Frequency of input voltage fluctuation range)

Minimum

Typical case

Maximum

40Hz

50Hz/60Hz

70Hz

          

7. Safety features

7.1 Pressure resistance  (Table 8 electrical test)

Ground Terminals(housing)Dielectric strength and are electrically connected to each other without a circuit between them. It should be able to withstand the test voltage in the table below 9,Test voltage(50~60)HzAC voltage between test terminals should not be corona, ionization, arcing or breakdown。                                        

Input the housing

1500V AC

1min

Leakage current ≤10mA

Input to output

1500V AC

1min

Leakage current ≤10mA

Output of the housing

500V AC

1min

Leakage current ≤10mA

 

7.2 Insulation resistance

Charging machine charging circuit and ground insulation resistance (housing) between the ambient temperature (23±2) ℃And a relative humidity 80%~90%when, not less than 20MΩ。

  7.3Contact current

When a human or animal contacts with one or more devices or device accessible parts, the current flowing through their bodies should be less than GB/T13870.1-2008 The contact current perception threshold requirement, the current value of the charger contact Table 9。                              

Contact current category

Alternating current mA

DC current mA

Limit

≤0.75

≤2

1.1.1 Grounding resistance of less than 0.1Ω. Required grounding conductor yellow / green and white color line

8. Audio Noise (Table 10 Noise)

Noise

Noise

≤65dB

distance 1.5m,A weight

9. EMC characteristics

Electromagnetic compatibility charger to meet the GB / T 18487.3-2001 electromagnetic environment in 11.3 test requirements。

10. Lightning Level

Lightning indicators

standard test

TBD

11. Cooling

Cooling fan

 

12. Product dimensions

External dimensions and installation dimensions:

13. Weight< 2kg

 

Please contact us using the Contact Us page

Electric Conversions, 515 N. 10th St., Sacramento, CA 95811